The Kickstop Lockguards
The DeadlockGuard is for use with a mortice deadlock
The Kickstop SashlockGuard is for use with a mortice sashlock
The original DeadlockGuard is the Kickstop 9601
300mm x 35mm x 7mm - available with UK and Euro keyway
300mm x 29mm x 7mm - available with Euro and Oval keyway
The 9601 is available in two widths and has four bolt through security fixings. Because of its popularity as a high security product, the wider version, in the more common UK and Euro keyways, is available in more finishes. The slightly narrower version is perfect where a large door stop and draught excluder is fitted to a door with a 2 1/2" deadlock.
Ideally, a cylinder rim lock should not be fitted too close to a mortice lock. As a rule, the mortice lock would be fitted at about a third up from the bottom of the door and the rim lock at about a third down from the top of the door. Occasionally, these locks are fitted so close together on a door that the 9601 DeadlockGuard will not fit. For any customer encountering this problem, we recommend the 9600 or 2000 DeadlockGuard. Always check your exact requirements before ordering.
The Kickstop 9600 DeadlockGuard is the shortest of our LockGuards
188mm x 35mm x 7mm - available with UK, Euro and Oval keyway
It has two bolt through security fixings, it's the most popular DeadlockGuard and is available in several finishes.
The Kickstop 2000 DeadlockGuard is 3mm thick
203mm x 50mm x 3mm - available with UK, Euro and Oval keyway
This has two bolt through security fixings and reversible plates that can very easily be removed, reversed and refitted at a future date to conceal any accidental scratches or other slight damage that wear and tear may do to the original finish.
The Kickstop 2300 DeadlockGuard is the a recent version
230mm x 50mm x 5mm - available with UK or Euro keyway
White and Satin Silver polyester powder coated finish as well as Brasslux and Bright Chrome plated finish
This is an extreme very substantial Lockguard with two bolt through security fixings.
The Kickstop 2340 DeadlockGuard is the most recent version
230mm x 40mm x 5mm - available Euro keyway
Satin Silver polyester powder coated finish
This is a very substantial Lockguard with two bolt through security fixings.