kickstop_door_p5sl

BUY Mortice SashlockGuard

Kickstop SashlockGuard

  

A mortice lock is morticed into the door.  Unfortunately, removing wood from the door, in order to fit the lock, will weaken the door at the very point where strength is required.

Choosing and fitting a LockGuard to a door fitted with a 'standard' mortice deadlock is relatively straightforward and Kickstop supplies the largest selection of LockGuard plates available for this purpose.

A sashlock generally requires more wood to be removed than a deadlock and has an additional  hole drilled through the door for the lock spindle to pass through.

 

  • Kickstop's unique SashlockGuard has reversible offset plates to allow fitting even if the frame has wider door stops and draught excluder.
  • The elongated apertures in the SashlockGuard plates are designed to accommodate the spindle and keyway/cylinder of most sashlocks.

 

Kickstop SashlockGuard - 9619

A Universal keyway - steel Lock Guard for Mortice Sashlock

75mm wide

For UK Keyway, EURO and OVAL Profile Cylinder

To Reinforce and Strengthen Wooden Door

Backset: 27mm minimum - 47mm maximum

Centres: 30mm minimum - 92mm maximum